This video from the 2022 NCC Seminars discusses Section B Water services from NCC 2022 Volume Three.

Transcript

0:00

foreign [Music]

0:10

Okay let's get into the changes in section  B Water Services. We will look at all parts  

0:15

of the water services: Parts B1 cold water, B2  heated water, part B3 non-drinking Water Services,  

0:24

part B4 fire fighting Water Services,  part B5 cross connection control,  

0:30

Parts B6 and B7 rainwater services and rainwater  storage, and I will also go into some detail on  

0:37

the new specification 41 the new deemed to satisfy  for backflow prevention hazard identification.  

0:45

As you all know plumbing codes evolve and they  need to be kept updated so they maintain pace  

0:49

with industry trends and product innovation.  When we started to review PCA 2019 we were hit  

0:56

with a number of areas that required work. In  part B1 cold water services we look at things  

1:02

like plumbing in a bushfire area, how the PCA  interacts with the FPAA101d requirements around  

1:09

residential fire sprinklers, water efficiency  provisions, rainwater top-up lines etc, plus the  

1:16

other items that keep the code relevant to the  requirements for the modern world. Three areas  

1:22

of change in 2022 require specific attention here  today. These are water efficiency Clause B1D2,  

1:29

plumbing in bushfire prone areas, Clause B1D4  and FPAA101d for the sprinklers Clause B1D5.

1:40

Water efficiency B1D2. I know there is a  lot on this slide but is important to go  

1:46

over this with you. Here you will again see  the provision numbering: B in the section,  

1:50

1 in the section number, D the type of provision  being a Deemed to Satisfy provision, and 2 being  

1:56

a provision and clause number. Okay but let's  talk about that provision. The water efficiency  

2:02

requirements that have have now been aligned  with the WELS star ratings. WELS is the water  

2:08

efficiency labelling and standard scheme that I am  sure you'll know about. This will make it easier  

2:13

for practitioners to identify products compliant  to the water efficiency requirements of the PCA.  

2:19

There is no longer any need to test the flows  or look for the flow rate data on the product.  

2:24

If it has a WELS rating and falls in line with  the DTS you're good to go. This is important to  

2:32

note that there has not been any efficiency  increases in water efficiency in this code.  

2:39

This is a new DTS for 2022. A reference to AS  3959 for plumbing in bushfire prone areas has  

2:47

been added to highlight that there are specific  differences for building and plumbing in these  

2:51

areas. The requirements for compliance with AS  3959 are determined by the Bushfire Attack Level  

2:58

or BAL. This is a method for rating the intensity  of a location's potential exposure to bushfire.  

3:06

This standard will now be referenced in both  the BCA and the PCA to ensure consistency in the  

3:11

solutions and regulations in bushfire prone areas.  In respect to plumbing in a cold water service,  

3:17

the standard encompasses areas for consideration  that include materials and installation criteria.

3:25

This is another new DTS provision for 2022.  B1D5 sees that relocation of the reference  

3:33

to FPAA101d from the fire fighting water  services part B4 to the cold water services.  

3:41

This is to better align with the requirements of  the system due to the fact that it is connected  

3:45

to the drinking water supply. We are starting to  see an increase in this method of construction and  

3:51

installing sprinklers in class two and three  buildings and as most of you know this fire  

3:56

sprinkler system uses a separate drinking water  line to feed the sprinkler heads and the toilets.  

4:02

This aspect meant it was more  suited to be covered in the  

4:05

cold water surface part of the PCA and  not the fire fighting services section,  

4:10

which are not regulated by plumbing  regulators in each state or territory.

4:14

Now onto part B2 - heated water surfaces. I will  touch on four areas of change in part B2 heated  

4:20

water services in this section. One, you'll  see that the water efficiency requirements  

4:25

have been aligned with the WELS ratings here  too. This will make it easier for practitioners  

4:30

to identify products compliant to the water  efficiency requirements of the PCA. Again,  

4:35

it is important to note that there has not been  an increase in stringency for water efficiency.  

4:42

Number two is minor changes to the heated  water energy efficiency requirements; however,  

4:46

the state and territory variations need to be  consulted to ensure that the local requirements  

4:51

are taken into consideration. Number three,  expanded information has been included as  

4:58

guidance material for heated water services.  This information is based on a research study  

5:03

in the scalding events and are prompted  by the states and territory regulators.  

5:08

The simple suggestions provided in the PCA are  expected to go a long way to reducing the  

5:14

likelihood of scalding incidents occurring  from heated tap water. And number four is  

5:19

the additional clarity provided on the application  of heated water temperature control requirements  

5:24

as different jurisdictions have different  triggers. The national content of the PCA has  

5:29

been clarified and any variation to this approach  is now clearly outlined in the state appendix.

5:37

I apologise for the wordiness of this slide and  there are just too many words here to follow,  

5:42

but it is all about the reducing or preventing  scalding in the bath or shower.  

5:47

I've copied across the clause directly from the  PCA so you can see how explanatory information  

5:52

boxes like this look in the code. This explanatory  information provides guidance on types of taps,  

5:58

mixer levers, the positioning, the height, the  location positioning and the use of recesses.  

6:04

This work was prompted by a report  by the Burns Registry of Australia  

6:08

and New Zealand that identified 80 per cent of  all scalds were in the bath or shower.  

6:14

This slide shows that 80 per cent of scald injuries happen  when bathing; that is, from the bath or shower.  

6:21

Nothing comes close, and this is why it was so  important to protect the consumer through the PCA.  

6:26

When we saw this data it was  like a sledgehammer hitting us.  

6:29

We state in the PCA that the objective  of the part is to safeguard people from  

6:34

illness, injury or loss, including loss of  amenity, due to a failure of a heated water  

6:39

installation, and ensure that the heated water  installation is suitable. The amount of illness,  

6:45

injury and loss that heated water scalding  inflicts meant changes were needed.

6:53

This slide tells a story as well.  When bath and shower hot water scalds it  

6:58

is all about the age of the person. This  slide from the report shows that people  

7:02

between the ages of 6 and 50 generally  can get out of the way but either side  

7:07

of that they cannot quickly enough, so  this is what the provision is all about.  

7:12

We know people don't like to be micromanaged or  nanny stated, but we have to acknowledge that  

7:17

there are some members of society that  are not aware of the dangers present.  

7:22

This then leads me into the next slide -  B2D5 maximum delivery temperature. Along  

7:29

with the guidance information around tap  locations etc, changes have been made to  

7:34

the temperature of delivered heated water  at the outlet of each sanitary fixture.  

7:39

The big thing to note in this provision is, being  a DTS, it stipulates specific temperatures for  

7:46

specific installations not more than 45 degrees  C in A, and not more than 50 degrees C elsewhere.  

7:54

You'll also note that this provision is for  heated water installations for personal hygiene  

8:00

so if hotter water is wanted in the laundry  or kitchen it's still available. Again though,  

8:06

check with any state and territory  variation that may apply in your region.  

8:11

We have also added some supporting additional  explanatory information for clarity on this slide  

8:17

and this explanatory information in the provisions  gives some clarity and guidance around scenarios  

8:22

covered in B2D5 on the last slide and may  include installation shown in this slide.  

8:30

Another area for thought is that consideration  should be given to the intended occupants of  

8:35

the building, when commissioning the  heated water delivery temperature.  

8:39

For example, if the occupants of a Class 1  building are older adults or young children,  

8:43

a lower temperature than specified in B2D5 could  or should be considered. I would like to let the  

8:51

audience know that the work on scald prevention  done by the ABCB office and the Plumbing Codes  

8:56

Committee has attained international recognition  and many hospitals and burns agencies around the  

9:01

world have cited the work done by the ABCB as  integral steps in reducing tap water scalding.  

9:08

It sort of makes you feel good that you really  make an impact to keep Australians safe in the  

9:12

bathroom. Leaving heated water now, we move on  to part B3 - non-drinking water. A non-drinking  

9:18

water service must not be connected to any outlet  that supplies water for: A) human consumption  

9:24

B) food preparation; C) food utensil washing; or  D) personal hygiene. It still must comply with the  

9:33

water efficiency requirements similar to a cold  water service, as it may service toilet systems.  

9:39

The performance requirements in this part  has been expanded for 2022 to include more  

9:46

performance requirements aspects, and these include  water velocity identification of pipes access and  

9:52

location pressure delivery, and how the system  must be designed to limit uncontrolled discharge,

10:00

Moving on to part B4, firefighting water services.

10:05

There have been a few changes to the  firefighting water services part of this section;  

10:10

however, they aren't expected to change the  way practitioners are currently working.  

10:14

These are more clarification  amendments as the solutions,  

10:17

and reference documents used for firefighting  water services were always available  

10:22

but now it is clear what systems can be used  by directly referencing them in Volume 3.  

10:29

At this point is probably a good time to stop and  use firefighting water services as an example of  

10:35

the relationship between the Building Code of  Australia and the Plumbing Code of Australia. A  

10:40

key thing to remember is that NCC Volumes One and  Two will outline when a firefighting water service  

10:46

is required, but NCC Volume Three provides solutions  how these in systems are to be installed.

10:57

And in this example you can see how the  DTS references the applicable standards.  

11:02

It was important to expand on the provisions  around fire sprinkler systems as it provides  

11:06

greater access for the practitioner to the  requirements. By elevating the specific standards  

11:12

into the DTS, greater direction is provided.  This is the same with fire hydrants, hose reels  

11:20

and firefighting water services in bushfire prone  areas all new for 2022. Although the service work  

11:27

is usually not regulated by plumbing regulators, plumbers generally do a lot of this work.

11:34

Well enough of the fun stuff. Let's keep  moving on to Part B six rainwater services.  

11:39

The rainwater harvesting and use part of NCC  2019 has been split into two parts in NCC 2022.  

11:46

One part pertaining to rainwater  services and one to rainwater storage.  

11:51

There hasn't been any technical changes to the  provisions of these parts from NCC 2019; however,  

11:57

this has been a significant formatting change by  splitting it into two parts. Generally the code  

12:03

considers that whether drinking water is provided  by a network utility operator, a rainwater  

12:08

service is a service provided for non-drinking  purposes such as toilet flushing and garden taps.  

12:14

In rural areas where rainwater is the only source  of water and is used for drinking, this is a cold  

12:20

water service. Additional clarity has also been  provided through the introductions to each part  

12:27

and another important section here is that  the backflow provisions for rainwater tanks  

12:32

remain as per 2019 but we're expecting  to do a full review of this for NCC 2025.  

12:40

Another point is that this part does not apply  to rainwater used for irrigation purposes  

12:46

and it is important to note that where water  provided by a network utility operator is not  

12:51

available or not utilized as a primary water  source for drinking and personal hygiene,  

12:56

roof collected rainwater is considered  to be a cold water service supplied by  

13:01

an alternative source and must comply to  the provisions of the cold water service.

13:08

Part B7 rainwater storage. This part applies from  the point of entry rate of the rainwater to the  

13:15

rainwater storage to the point of connection  to the cold or rainwater services applicable  

13:20

as outlined on the previous slide. Where  a network utility operator supply is not  

13:24

available it applies to the storage of water  intended for drinking and personal hygiene  

13:29

used as an alternative water source a  plot supplying a cold water service.